Mixing on multiple subs

[mgreenb]

I know this is possible on the dream constellation but I forget how to get the faders to come up for a particular sub. For example. Say you have two 5.1 mixes going at the same time. One on the Main 5.1 and another on a Sub 5.1. You want to make a change on the mix going to the Sub 5.1 but not on the Main 5.1. Can someone please remind me how to call up the faders feeding the Sub 5.1 only. Thanks for you help on this. Answer can also be emailed to mgreenberg@nwe.com

Mike G.

[MattM]

Key combo is BLUE plus "Faders To" at the top of the master section. Then press the sub mix button in the "busses" area you wish to control. Faders will now show status of the sub mix and you can make discrete changes here that will not affect the main mix.

Matt

_________________
Matt Melberg
Audio Mixer
Riot Atlanta

[williamj]

Also, the bus reduction mode has to be "Reduce" or "Free" for the bus to be available for "Faders To".

[aceshigh]

..if you havn't figured it out yet, since these posts looks a bit old (nov08?).

the blue enable button next to the "master" fader is what will allow you to write automation to the reduction faders.